TorkLift T3307 Rear Camper Tie Downs for Select 2016–2023 Toyota Tacoma
- Free shipping in the contiguous U.S. Standard shipping is free on every order. Eligible in-stock orders $200+ ship by air, with estimated 1–2 business day transit after dispatch; oversized or remote shipments may take longer.
- 60-day returns Unused, uninstalled items in original packaging. Customer pays standard return shipping; no restocking fee.
- Verify fitment with TorkLift Confirm your exact application in the manufacturer’s Fit Finder before ordering.
TorkLift T3307 Rear Frame-Mounted Tie Downs
The TorkLift T3307 is the rear pair of standard-steel frame-mounted truck camper tie downs for select 2016–2023 Toyota Tacoma trucks. TorkLift lists supported 5- and 6-foot-bed applications, with the correct choice depending on the truck's year, cab, drive layout and equipment. Its frame-mounted receivers and removable inserts provide two rear connection points for a truck camper. A corresponding front pair and four spring-loaded turnbuckles are separate.
Confirmed Fitment
- Use TorkLift's current Fit Finder for the exact Tacoma year, Access Cab or Double Cab, 5- or 6-foot bed, and supported 2WD or 4WD configuration. The manufacturer's catalog range does not mean every 2016–2023 Tacoma uses T3307.
- Confirm the installed rear receiver hitch, bumper and any other aftermarket equipment. Rear brackets are application-specific and should be checked against the truck's actual frame and hitch arrangement.
- Select the front pair separately with the same Fit Finder. A T2303 front set appears on some Tacoma applications, but it cannot be assumed for every 2WD/4WD, cab and bed combination covered by this rear listing.
Key Features
- Two dedicated rear frame attachment locations reduce reliance on the pickup bed or bumper for camper retention.
- Removable inserts can be pulled out when the camper is not mounted, with the fixed brackets left near the frame.
- TorkLift lists no-drill mounting on its confirmed T3307 configurations and supplies the application-specific bolt/accessory kit.
- Standard-steel construction, made in the USA and covered by TorkLift's Legendary Lifetime Warranty.
Specifications
| Part Number | T3307 |
| Position | Rear pair only |
| Vehicle | Select 2016–2023 Toyota Tacoma |
| Bed | Supported 5 or 6 ft, configuration-dependent |
| Cab / Drive | Supported Access/Double Cab and 2WD/4WD applications; verify exact truck |
| Material | Standard steel |
| Mount | Application-specific frame brackets |
Included and Required
One T3307 steel rear pair with the manufacturer-specified bolt/accessory kit and removable inserts. The corresponding front pair and four spring-loaded turnbuckles for a typical four-corner installation are purchased separately. Verify the front part against the actual Tacoma rather than ordering solely by shared model year.
Installation and Fitment Notes
- Check cab, bed, drive type, installed hitch and any equipment that could obstruct the rear brackets with the current TorkLift Fit Finder. Confirm the camper manufacturer's anchor requirements and the Tacoma's rated payload before use.
- Follow the T3307 installation sheet and torque instructions. Test that both inserts slide into their receivers without interference and are pinned securely before attaching turnbuckles.
- Use appropriately matched spring-loaded turnbuckles at all four corners with the correct front and rear kits. This rear-only part does not form a complete camper tie-down setup by itself.
Before You Order
T3307 is a rear steel pair for selected 2016–2023 Tacoma configurations with a supported 5- or 6-foot bed. Verify the exact cab, drive and hitch in the Fit Finder, then choose a compatible front pair and turnbuckles separately.
Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.
We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.
Read full shipping information for processing times and delivery exceptions.
At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.
Return Eligibility
We gladly accept returns for a refund or store credit within 60 days of delivery.
To be eligible for a return, items must be:
- New and unused
- Uninstalled
- In resalable condition
- Returned in the original packaging
To start a return, simply contact our customer support team and we will provide return instructions.
Return Shipping
Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.
Please note that we do not provide prepaid return shipping labels for standard returns.
Inspection Process
Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.
Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.
Refunds
After your return has been received and inspected, your refund will be processed to the original payment method.
- Refunds are typically issued within 5 business days after inspection.
- Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
- No restocking fees apply.
Important Notice
All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.
Returns that do not meet these requirements may be refused and returned to the sender.
Need Assistance?
If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.
Simple returns. Fast refunds. No restocking fees.
Recently viewed