TorkLift D1108 SuperHitch Original 20K for 2013 Ram 2500 SRW or 2013–2018 Ram 3500 SRW/DRW with a 6.5- or 8-foot bed
- Free shipping in the contiguous U.S. Standard shipping is free on every order. Eligible in-stock orders $200+ ship by air, with estimated 1–2 business day transit after dispatch; oversized or remote shipments may take longer.
- 60-day returns Unused, uninstalled items in original packaging. Customer pays standard return shipping; no restocking fee.
- Verify fitment with TorkLift Confirm your exact application in the manufacturer’s Fit Finder before ordering.
TorkLift D1108 SuperHitch Original 20K
The TorkLift D1108 SuperHitch Original 20K is a truck-specific dual-receiver tow hitch for 2013 Ram 2500 SRW or 2013–2018 Ram 3500 SRW/DRW with a 6.5- or 8-foot bed. Its upper and lower openings support a compatible SuperTruss extension when towing behind a camper. The published 17,000 lb trailer / 1,700 lb tongue weight-carrying and 20,000 lb trailer / 2,000 lb tongue weight-distributing limits apply without an extension; the truck and extension can set lower limits.
Confirmed Fitment
- Manufacturer-listed trucks: 2013 Ram 2500 SRW or 2013–2018 Ram 3500 SRW/DRW with a 6.5- or 8-foot bed. Verify the complete cab, bed, wheel and hitch configuration with TorkLift.
- The SuperTruss uses both receiver openings; choose its length and reduced capacity from the hitch/extension matrix.
- Replacing the factory receiver may change which rear camper tie-down part fits. Check the corresponding rear application.
Key Features
- Dual reinforced receiver arrangement supports ordinary ball mounts or an approved SuperTruss setup as directed.
- Vehicle-specific frame mounting is no-drill for the listed trucks; the kit includes bolt/accessory hardware and installation instructions.
- Made in the USA with TorkLift's Legendary Lifetime Warranty.
Specifications
| Part Number | D1108 |
| Receivers | 2-in upper / 2-in lower |
| Weight Carrying, No Extension | 17,000 lb trailer / 1,700 lb tongue |
| Weight Distributing, No Extension | 20,000 lb trailer / 2,000 lb tongue |
| Application | 2013 Ram 2500 SRW or 2013–2018 Ram 3500 SRW/DRW with a 6.5- or 8-foot bed |
| SuperTruss | Separate; rating depends on length and hitch |
Included and Required
One D1108 hitch assembly, vehicle-specific bolt/accessory kit, two hitch pins and clips, and installation instructions. A SuperTruss, wiring, ball mount and weight-distribution system are separate; the weight-distribution rating requires the appropriate system.
Installation and Fitment Notes
- Use the lowest rating among truck, hitch, extension, ball mount and trailer; tongue load also counts against truck payload.
- The 20,000/2,000-lb figure requires the correct weight-distribution system and does not carry over to every SuperTruss length.
- For this D1108 SuperHitch, TorkLift identifies R3507 as the compatible rear camper tie-down; confirm the complete truck configuration before ordering either part.
Before You Order
Confirm D1108 on your exact Ram 2500/3500 bed/wheel arrangement, including its receiver and rear-tie-down configuration. Match any extension to the overhang and manufacturer's reduced-capacity table.
Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.
We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.
Read full shipping information for processing times and delivery exceptions.
At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.
Return Eligibility
We gladly accept returns for a refund or store credit within 60 days of delivery.
To be eligible for a return, items must be:
- New and unused
- Uninstalled
- In resalable condition
- Returned in the original packaging
To start a return, simply contact our customer support team and we will provide return instructions.
Return Shipping
Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.
Please note that we do not provide prepaid return shipping labels for standard returns.
Inspection Process
Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.
Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.
Refunds
After your return has been received and inspected, your refund will be processed to the original payment method.
- Refunds are typically issued within 5 business days after inspection.
- Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
- No restocking fees apply.
Important Notice
All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.
Returns that do not meet these requirements may be refused and returned to the sender.
Need Assistance?
If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.
Simple returns. Fast refunds. No restocking fees.
Recently viewed