TorkLift C3215 Rear Camper Tie Downs for Select 2015-2019 Chevy/GMC 2500/3500
- Free shipping in the contiguous U.S. Standard shipping is free on every order. Eligible in-stock orders $200+ ship by air, with estimated 1–2 business day transit after dispatch; oversized or remote shipments may take longer.
- 60-day returns Unused, uninstalled items in original packaging. Customer pays standard return shipping; no restocking fee.
- Verify fitment with TorkLift Confirm your exact application in the manufacturer’s Fit Finder before ordering.
TorkLift C3215 Rear Camper Tie Downs for Chevy/GMC 2500 and 3500
The TorkLift C3215 is a standard-steel, frame-mounted rear pair for select 2015–2019 Chevrolet Silverado and GMC Sierra 2500/3500 truck camper applications. The manufacturer's listing includes supported 6.5-foot and 8-foot beds, depending on the exact truck and equipment. These rear anchors attach to the truck frame rather than using the pickup bed or bumper as tie-down points.
Confirmed Fitment
- Select 2015–2019 Chevrolet/GMC 2500 and 3500 configurations with a supported 6.5- or 8-foot bed; not a universal fit for every truck in that range.
- Listed applications include Single Rear Wheel (SRW) trucks and a limited 2018 Dual Rear Wheel (DRW) Regular Cab, 8-foot-bed configuration.
- Rear position only: one driver-side and one passenger-side tie down. The front pair is a separate purchase.
- Rear compatibility depends on the installed receiver hitch and other underbody equipment.
Key Features
- Vehicle-specific TRUE Frame-Mounted design in standard steel.
- Bolt-on, no-drill installation for applications listed by TorkLift.
- Removable tie-down inserts leave the fixed receivers tucked under the truck between camper trips.
- Made in the USA and backed by TorkLift's Legendary Lifetime Warranty.
Specifications
| Part Number | C3215 |
| Position | Rear |
| Series / Material | Classic, standard steel |
| Models / Years | Select Chevy/GMC 2500/3500, 2015–2019 |
| Bed Length | 6.5 or 8 feet, where listed |
| Mounting | Vehicle-specific frame mount |
| Quantity | One rear pair |
| Talon Alternative | C3215A, sold separately |
Included and Required
The C3215 rear kit includes left and right frame-mounted brackets, two removable inserts, retaining pins and clips, vehicle-specific mounting hardware, and installation instructions. It does not include front tie downs or turnbuckles. Add the correct front pair and four properly rated spring-loaded turnbuckles for a complete four-point truck camper setup.
Installation and Fitment Notes
- Check the hitch, spare-tire and underbody area for interference before tightening the brackets; use the C3215 instruction sheet and its torque chart.
- A different hitch or a change from SRW to DRW may require a different rear part number. Do not select C3215 from bed length alone.
Before You Order
Confirm the model year, Silverado or Sierra 2500/3500, bed length, cab, rear-wheel setup, hitch, drivetrain, and installed accessories in TorkLift's Fit Finder before ordering. Check truck payload against the camper's loaded weight separately. The manufacturer's current page describes 3500 applications in its introduction but includes 2500/3500 in its heading and key specifications; therefore, especially for a 2500, confirm the exact configuration rather than assuming fit.
Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.
We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.
Read full shipping information for processing times and delivery exceptions.
At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.
Return Eligibility
We gladly accept returns for a refund or store credit within 60 days of delivery.
To be eligible for a return, items must be:
- New and unused
- Uninstalled
- In resalable condition
- Returned in the original packaging
To start a return, simply contact our customer support team and we will provide return instructions.
Return Shipping
Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.
Please note that we do not provide prepaid return shipping labels for standard returns.
Inspection Process
Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.
Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.
Refunds
After your return has been received and inspected, your refund will be processed to the original payment method.
- Refunds are typically issued within 5 business days after inspection.
- Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
- No restocking fees apply.
Important Notice
All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.
Returns that do not meet these requirements may be refused and returned to the sender.
Need Assistance?
If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.
Simple returns. Fast refunds. No restocking fees.
Recently viewed