TorkLift F3006 Rear Camper Tie Downs for 2011-2016 Ford F250/F350/F450, 6.75' or 8' Bed
- Free shipping in the contiguous U.S. Standard shipping is free on every order. Eligible in-stock orders $200+ ship by air, with estimated 1–2 business day transit after dispatch; oversized or remote shipments may take longer.
- 60-day returns Unused, uninstalled items in original packaging. Customer pays standard return shipping; no restocking fee.
- Verify fitment with TorkLift Confirm your exact application in the manufacturer’s Fit Finder before ordering.
TorkLift F3006 Rear Camper Tie Downs for Ford Super Duty
The TorkLift F3006 is a standard-steel rear frame-mounted camper tie-down pair for select 2011–2016 Ford F-250, F-350 and F-450 Super Duty trucks with factory beds. Supported applications include 6.75- and 8-foot beds depending on the exact vehicle; the F-450 listings use the 8-foot bed. The brackets create rear camper anchor points at the truck frame.
Confirmed Fitment
- Select 2011–2016 Ford F-250 and F-350 Super Duty trucks with supported factory 6.75- or 8-foot beds.
- Select 2011–2016 Ford F-450 Super Duty trucks with a supported factory 8-foot bed.
- Cab, drivetrain, installed receiver hitch and other equipment can change the correct rear kit. Use TorkLift’s Fit Finder for the exact configuration.
- This is a rear pair only; the front pair must be matched to the truck and its running boards separately.
Key Features
- Vehicle-specific TRUE Frame-Mounted rear anchors made from standard steel.
- Bolt-on installation without drilling for the manufacturer’s listed applications.
- Removable inserts leave a low-profile receiver beneath the truck between camper trips.
- Made in the USA with TorkLift’s Legendary Lifetime Warranty.
Specifications
| Part Number | F3006 |
| Position | Rear |
| Series / Material | Classic, standard steel |
| Models / Years | Select Ford F-250/F-350/F-450, 2011–2016 |
| F-250 / F-350 Bed | Factory 6.75 or 8 ft where listed |
| F-450 Bed | Factory 8 ft where listed |
| Quantity | One rear pair |
| Talon Alternative | F3006A, sold separately |
Included and Required
F3006 is the rear tie-down kit, with driver- and passenger-side mounting components, two removable inserts, retaining hardware and vehicle-specific installation components. Verify the contents against TorkLift’s instructions. Add the correct front tie-down pair and four properly rated spring-loaded turnbuckles, sold separately, to make a complete four-corner camper connection.
Installation and Fitment Notes
- The installed receiver hitch is a key rear-fitment detail. Confirm factory or aftermarket hitch type and any SuperHitch upgrade in TorkLift’s Fit Finder before ordering.
- Check rear frame, spare tire, wiring and accessory clearance, then use the F3006 instruction sheet and specified hardware torque.
- F3006 is the standard-steel part. F3006A is the separate Talon version; neither suffix nor material is interchangeable by assumption.
Before You Order
Confirm the 2011–2016 F-250/F-350/F-450 year and model, factory bed length, cab, rear-wheel setup, receiver hitch and underbody accessories. F-450 uses the supported 8-foot-bed application; do not infer a 6.75-foot F-450 fit. Check truck payload against the fully loaded camper separately. The old title omitted F-450 and the supported bed lengths and contained the typo “Tie Downss.”
Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.
We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.
Read full shipping information for processing times and delivery exceptions.
At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.
Return Eligibility
We gladly accept returns for a refund or store credit within 60 days of delivery.
To be eligible for a return, items must be:
- New and unused
- Uninstalled
- In resalable condition
- Returned in the original packaging
To start a return, simply contact our customer support team and we will provide return instructions.
Return Shipping
Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.
Please note that we do not provide prepaid return shipping labels for standard returns.
Inspection Process
Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.
Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.
Refunds
After your return has been received and inspected, your refund will be processed to the original payment method.
- Refunds are typically issued within 5 business days after inspection.
- Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
- No restocking fees apply.
Important Notice
All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.
Returns that do not meet these requirements may be refused and returned to the sender.
Need Assistance?
If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.
Simple returns. Fast refunds. No restocking fees.
Recently viewed