TorkLift C1212 SuperHitch Original 20K Hitch, 2015–2019 Chevy/GMC 2500/3500 SRW, 6.5-ft Bed
- Free shipping in the contiguous U.S. Standard shipping is free on every order. Eligible in-stock orders $200+ ship by air, with estimated 1–2 business day transit after dispatch; oversized or remote shipments may take longer.
- 60-day returns Unused, uninstalled items in original packaging. Customer pays standard return shipping; no restocking fee.
- Verify fitment with TorkLift Confirm your exact application in the manufacturer’s Fit Finder before ordering.
TorkLift C1212 SuperHitch Original 20K Hitch, 2015–2019 Chevy/GMC 2500/3500 SRW, 6.5-ft Bed
TorkLift C1212 is the dual 2-inch SuperHitch Original 20K for selected 2015–2019 Chevrolet Silverado and GMC Sierra 2500/3500 trucks with a 6.5-ft bed and single rear wheels. It supports a matched SuperTruss extension when a camper overhang requires additional trailer clearance.
Application and Fitment
- Selected 2015–2019 Chevrolet Silverado/GMC Sierra 2500/3500 pickups with a 6.5-ft bed and single rear wheels (SRW).
- The C1212 table lists all cabs, 4x2 or 4x4, and gas or diesel for the stated SRW application.
- Confirm the bed length, rear-wheel configuration and existing receiver equipment. The published C1212 application is for SRW trucks.
Key Features
- Upper and lower 2-inch receivers accept compatible ball mounts and the matched SuperTruss system.
- Frame-mounted Original 20K design with reinforced hitch-pin locations.
- Manufacturer-listed no-drill mounting on confirmed applications; two receiver positions offer ball-height choices.
Specifications
| Manufacturer Part Number | C1212 |
| Hitch Family | SuperHitch Original 20K |
| Vehicle Application | Select 2015–2019 Chevy/GMC 2500/3500, 6.5-ft bed |
| Rear Wheel Configuration | Single rear wheels (SRW) |
| Upper / Lower Receiver | 2 in / 2 in |
| Weight Carrying, No Extension | 17,000 lb gross trailer weight / 1,700 lb tongue weight |
| Weight Distribution, No Extension | 20,000 lb gross trailer weight / 2,000 lb tongue weight |
| With SuperTruss Extension | Use the selected length and configuration ratings |
| Rear Camper Tie-Down | C3216, separate kit |
Included and Required
One C1212 receiver assembly, complete bolt/accessory hardware kit, two hitch pins/clips and the C1212 instructions. Ball mount, trailer ball, wiring, SuperTruss, weight-distribution equipment and the C3216 rear camper tie-down pair are separate.
Installation and Fitment Notes
- Follow the C1212 instructions for existing receiver parts, installation clearances, fastener torque and checks after initial use.
- The 20,000/2,000 lb rating requires weight distribution and no extension. Weight carrying without an extension is rated at 17,000/1,700 lb.
- Adding SuperTruss changes trailer and tongue-weight limits. Check the selected length and use the lowest rating across the truck and towing components.
- Recheck rear camper tie-down selection when replacing the factory receiver. TorkLift specifies C3216 for C1212.
Before You Order
Verify the 6.5-ft bed, single rear wheels and exact C1212 application. Choose any extension and weight-distribution equipment by the camper clearance, intended trailer load and all applicable towing limits.
Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.
We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.
Read full shipping information for processing times and delivery exceptions.
At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.
Return Eligibility
We gladly accept returns for a refund or store credit within 60 days of delivery.
To be eligible for a return, items must be:
- New and unused
- Uninstalled
- In resalable condition
- Returned in the original packaging
To start a return, simply contact our customer support team and we will provide return instructions.
Return Shipping
Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.
Please note that we do not provide prepaid return shipping labels for standard returns.
Inspection Process
Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.
Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.
Refunds
After your return has been received and inspected, your refund will be processed to the original payment method.
- Refunds are typically issued within 5 business days after inspection.
- Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
- No restocking fees apply.
Important Notice
All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.
Returns that do not meet these requirements may be refused and returned to the sender.
Need Assistance?
If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.
Simple returns. Fast refunds. No restocking fees.
Recently viewed