TorkLift C1209 SuperHitch Original 20K Hitch, 2011–2014 Chevy/GMC 2500/3500, 6.5-ft Bed

$803.04

Free standard shipping on every order in the contiguous U.S. · Free 1–2 business day air on eligible in-stock orders $200+ after dispatch.

TorkLift C1209 SuperHitch Original 20K Hitch, 2011–2014 Chevy/GMC 2500/3500, 6.5-ft Bed TorkLift C1209 is the SuperHitch Original 20K for selected 2011–2014 Chevrolet...
View full details
Available:
Sold Out
Quantity:
Guaranteed safe checkout:
PayPal
Venmo

TorkLift C1209 SuperHitch Original 20K Hitch, 2011–2014 Chevy/GMC 2500/3500, 6.5-ft Bed

TorkLift C1209 is the SuperHitch Original 20K for selected 2011–2014 Chevrolet Silverado and GMC Sierra 2500/3500 short-bed trucks. Two 2-inch receivers provide the foundation for a matched SuperTruss extension when towing behind a camper.

Application and Fitment

  • Selected 2011–2014 Chevrolet Silverado/GMC Sierra 2500/3500 pickups with a 6.5-ft bed. The C1209 table lists all cabs, 4x2 or 4x4, and gas or diesel.
  • TorkLift's application guide limits this short-bed fit to factory wheel/tire configurations with rims 18 inches or smaller. Have larger rims or aftermarket tire setups confirmed separately.
  • The guide also notes that the spare-tire hanger and tailpipe may need modification. Verify the exact truck and installation clearances before ordering.

Key Features

  • Upper and lower 2-inch receivers accept compatible ball mounts and the matched SuperTruss system.
  • Frame-mounted Original 20K design with reinforced hitch-pin locations.
  • Manufacturer lists no-drill receiver mounting; the short-bed spare-tire and exhaust notes still apply.
  • Two receiver positions offer ball-mount height choices within the towing equipment's ratings.

Specifications

Manufacturer Part Number C1209
Hitch Family SuperHitch Original 20K
Vehicle Application Select 2011–2014 Chevy/GMC 2500/3500, 6.5-ft bed
Published Wheel/Tire Condition Factory configuration with rims 18 in or smaller
Upper / Lower Receiver 2 in / 2 in
Weight Carrying, No Extension 17,000 lb gross trailer weight / 1,700 lb tongue weight
Weight Distribution, No Extension 20,000 lb gross trailer weight / 2,000 lb tongue weight
With SuperTruss Extension Use the exact length and configuration ratings
Rear Camper Tie-Down C3216, separate kit

Included and Required

One C1209 receiver assembly, complete bolt/accessory hardware kit, two hitch pins/clips and the C1209 instructions. Ball mount, trailer ball, wiring, SuperTruss, weight-distribution equipment and the C3216 rear camper tie-down pair are separate.

Installation and Fitment Notes

  • Use the C1209 instructions for existing receiver components, spare-tire hanger and tailpipe clearance, fastener torque and checks after initial use.
  • The 20,000/2,000 lb hitch rating requires weight distribution and no extension. Weight carrying without an extension is rated at 17,000/1,700 lb.
  • SuperTruss has lower, length-specific limits. Stay within the lowest limit across the truck, hitch, extension and towing accessories.
  • Recheck rear camper tie-down selection when replacing the factory receiver. TorkLift identifies C3216 for C1209.

Before You Order

Confirm the 6.5-ft bed, factory wheel/tire condition and C1209 fit for the exact truck. Check spare-tire and exhaust clearance, then choose any extension and weight-distribution equipment by the intended trailer load and all applicable ratings.

Free shipping on every order to the 48 contiguous U.S. states and Washington, DC. Orders below $200 receive free standard shipping. Orders of $200 or more receive free 1–2 business day air service for eligible in-stock items; the estimate begins after dispatch. Oversized or remote shipments may take longer.

We do not ship to Alaska, Hawaii, U.S. territories, APO/FPO addresses or destinations outside the United States. We email tracking when your order ships. Orders above $200 may require an adult signature.

Read full shipping information for processing times and delivery exceptions.

At BuyCamperTieDown.com, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we're here to help.

Return Eligibility

We gladly accept returns for a refund or store credit within 60 days of delivery.

To be eligible for a return, items must be:

  • New and unused
  • Uninstalled
  • In resalable condition
  • Returned in the original packaging

To start a return, simply contact our customer support team and we will provide return instructions.

Return Shipping

Customers are responsible for return shipping costs unless the item received is defective, damaged, or incorrect.

Please note that we do not provide prepaid return shipping labels for standard returns.

Inspection Process

Once your return is received, our team will inspect the item to verify its condition and eligibility for a refund or credit.

Returns that show signs of installation, use, damage, missing components, or are not returned in the original packaging may be denied.

Refunds

After your return has been received and inspected, your refund will be processed to the original payment method.

  • Refunds are typically issued within 5 business days after inspection.
  • Refunds are returned to the original payment source (credit card, PayPal, or other payment method used during checkout).
  • No restocking fees apply.

Important Notice

All returned items must be received in unused, uninstalled, and resalable condition in their original packaging.

Returns that do not meet these requirements may be refused and returned to the sender.

Need Assistance?

If you have any questions regarding returns, refunds, or return eligibility, please contact our customer support team. We're always happy to assist.

Simple returns. Fast refunds. No restocking fees.

Related product